Our work
Dies for extruded ceramic.
THERMOBLOCK WITH TWO EXITS
With external brakes for adjustement.
TONGUE AND GROOVE DIE WITH SIX EXITS
Dies entirely made of tungsten (WIDIA), with external brakes for adjustment for the production of 1-metre long bricks.
"HOLLOW" 7x12 DIE
Conventional die made of steel with 18 flat exits for stacking freshly extruded bricks on kiln cars.
DIE FOR STONEWARE "FLOOR TILES"
Die with an internal treated steel jacked and external brakes for adjustment.
REFRACTORY DIE
Die for the production of refractory brick for tunnel kiln cars. This model is build in such a way that both width and height of bricks can be changed to fit the different kiln cars.
N9 HOLLOW DIE
Classical die with 10 flat exits, for stacking freshly extruded bricks on kiln car.
N7 HOLLOW DIE
Die with 12 flat exits made of tungsten carbide (WIDIA) and ceramic cubes, with external brakes for adjustment for stacking freshly extruded bricks on kiln cars.
N5 HOLLOW DIE
Die with 9 standing exits made of treated steel with external brakes for adjustment.
20x4 HOLLOW DIE
Classical die for the production of 20×4 partition tiles, with 15 flat exits for stacking freshly extruded bricks on kiln cars.
THERMOBLOCK DIE
30 thermoblock die made of steel with one exit and external brakes for adjusting.
DIE FOR ROOF TILES
Classical die made of treated steel with 4 exits which may be adapted so that the steel parts can be replaced with parts made of tungsten carbide (WIDIA).
HONEYCOMB DIE
Geros type Honeycomb die in operation.
TONGUE AND GROOVE DIE WITH 10 EXITS
Classical die made of treated steel for the production of 1-metre long bricks.
Ceramoldes S.L.
From our workshops we are ready to offer our customers all types of dies for the extrusion of ceramic. From the simplest classical models to the most sophisticated dies with external adjustement.
Should you wish to make any enquiry with Ceramoldes, S.L., kindly fill in the following form.